WinVNC SC aborts abruptally

Nacor · Post by **Nacor** » 2005-09-21 21:15

Hi,

I've started to test WinVNC SC and I've found a very big problem... I can't connect to the client!

Some Information:

- The WinVNC SC is configured to my public IP on port 5500
- The Listener is configured to use port 5500
- The Windows Firewall acepts incomming calls from WinVNC and port 5500
- The router (I'm behind a NAT) has the port 5000 (TCP) open and configured to send output to real 5500 port on my computer.

Well, everithings fine. I start the listener and the cliend runs the server, the connection is established an at last I see his computer's main screen... for only a couple of seconds. Then, everithing goes down.

Any idea?

Thanks in advance.

Nacor
-----------------------
nacor.blanco@gmail.com

Post by **Rudi De Vos** » 2005-09-21 21:28

Did you try without auto selection.

Select LAN and ZRLE as encoder.

The problem seems to happen when line speed differ a lot, and to many encoder jumps are done.

redge · Post by **redge** » 2005-09-21 23:24

same issue with winvnc 1.0.1 patched and quick option LAN and ZRLE selected encoder before connect within repeater 1.0.4 in the middle !