UltraVNC & MS Terminal Server

remal · Post by **remal** » 2004-09-23 13:57

Are you aware of any problems that exist with having UltraVNC and Terminal Server running on the same machine? I have had an instance where Terminal Server no longer works after installing the latest UltraVNC.

Guest · Post by **Guest** » 2004-09-23 14:26

RC18 or later TEST19 versions

Guest · Post by **Guest** » 2004-09-23 14:31

RC18 is the latest version that we have used.

Post by **Rudi De Vos** » 2004-09-23 17:13

I don't seea reason why terminal service don't work together with vnc.
Possible vnc have some problems, but not invers.

Test19 use sessionid, and possible this can cause interference
with ts. Never tested it.

MVG · Post by **MVG** » 2004-11-05 01:30

If VNC is installed from a terminal services session, I have found that it fails to start.

Just goto the box and install it from the true terminal.

remain · Post by **remain** » 2004-11-12 20:09

there are some problems with remote desktop...it installs fine, but if the computer is locked (at least due to a remote desktop session) there won't be a display through VNC until someone logs into the computer. also if you connect to VNC while using remote desktop, the screen will be black until you do something in your remote desktop session.

wayne247 · Post by **wayne247** » 2004-12-06 17:53

After installing the RC18 driver for video hook, my Terminal Services serevr became unable to receive any new connections. The RDP client reports some generic "error, check with your admin".

Anyone has ideas about that? I'm reverting vnc to non-videohook mode and will reboot the server tonight to see if it brings back terminal services.

RobH · Post by **RobH** » 2004-12-06 19:42

I installed and ran 19.3 on terminal server with no problems but don't use the display driver. Maybe that is causing the problem?

Post by **Rudi De Vos** » 2004-12-06 19:53

Driver is disabled when no vnc connection is active, in sleeping
mode, the mirror driver has no influence on the real video card.
All hardware acceleration, overlay etc....works when mirror is sleeping.

TS use a seperate session with his own video driver, this is independed iof what you run on the desktop.

I'm not the owner of a full RDP server, but "FUS" still works with the driver installed...

any specific events in the NTlog ?

UltraVNC

UltraVNC & MS Terminal Server

UltraVNC & MS Terminal Server

Don't install from Terminal Services

Terminal Services failure